求助这张cp的打线

矢量-陨灭 · 发表于 2023-4-25 17:00:51

如题

徐犍斌 · 发表于 2023-4-25 23:54:50

Ybo · 发表于 2023-4-26 09:36:36

搞个打印机打印下，就知道怎么弄了

wi无一 · 发表于 2023-4-26 17:23:37

打印下来就可以折了

芜湖起飞 · 发表于 2023-4-26 18:48:19

Skyplan2080 · 发表于 2023-4-27 00:03:24

sorra · 发表于 2023-4-28 10:47:05

明明_WGEQ · 发表于 2023-7-13 14:37:51

盲猜225取点

yyttkx · 发表于 2023-7-13 14:44:04

打印下来就可以

luma · 发表于 2023-7-20 18:50:52

[1] Study both the photo of the model and the CP in order to find out 'what is where' in the CP .... not too difficult here.
[2] now you know at least a fe mountain and valley folds ... for instance: the diagonal from the left upper corner to the right lower corner is a mountain fold ....
[3] fold those easy fold lines first and from there on the model will almost fold itself ....

to have an easier start you could print the CP and prefold ALL lines before going through the steps above

I must admit that at first I too was roo impressed with CPs to even want to try it. Then I decided to at least try one and .... it wasn't that difficult at all! Do realize that usually a CP doesn't have all necessary creasing lines.

帐号		自动登录	找回密码
密码			立即注册

[困难求助] 求助这张cp的打线