经验交流,智慧闪光---玉树临风002系列5

木偶

                                       有关信息


                                                                                                                              作者:玉树临风002
现在公司不忙，所以有机会去了一次日本城，日本城一直给人的印象是非常干净，
整洁。日本人对折纸非常自豪，日本城里的圣诞树上面的装饰都是折纸花球和纸鹤。我以前很喜欢去日本城喝咖啡，虽然价格比其他地方贵一点，不过那家咖啡店的对面就是一家插花花道的店铺。
而且那里很幽静，很少人大声说话。和凌乱嘈杂的唐人街比起来，
人气却差了十万八千里。
日本城有家专门卖折纸用纸的店铺Paper Tree.
里面的各式各样的纸琳琅满目，还有很多折纸书籍，神谷作品集60美金，
折纸探侦团30美金，而纸就比外面的贵很多，也许是比较专业，
还有很多大的尺寸的手工纸，差不多五块到二十块美金不等。和老板聊了一下，
象日本的高手折纸用纸一般大都用手工做的和纸，据说和紙有上千种不同的纸。
而每个不同的人用的纸都不一样，比如神谷，有专门人为他造纸，他自己也会做纸。不过有一个信息或者各位客官会有兴趣，她说有
一种backcoding paper techniques 就是有一种水一样的胶水把两张和紙粘在一起，
来增加纸的力度和记忆力，而且和紙（绵纸）本身会吸水所以就把两张纸成了一张纸，而且不会感觉很硬。另外得到一个信息，十月二十四到十一月十一号是世界折纸日。
http://worldorigamidays.org/

另外世界级顶极大师（包括神谷，小松等等）的展览；
http://www.flickr.com/photos/jos ... /72157602804505771/

还有一个华人高手；joseph wu 的网站。有教程和造纸的技术等等。
http://www.origami.as/home.html

由于在人家店里拍照要取得店主的许可，所以只能拍到橱窗。日本城走了一圈，只吃了一餐午饭，什么也没有得到。。。。。。。因为水平不到，还用不到那种昂贵的纸
由于美金贬值，壹圆店已经不复存在，都变成一点五圆了。







Backcoating
This is not backcoating as Yoshizawa does it, but is something that I developed based on an article written by Toshi Aoyagi. The formal Yoshizawa method of backcoating is much more involved.

For backcoating, you will need mulberry (kozo fibre) paper (or another type of Japanese handmade paper, washi), a large flat surface to work on, paste, and a brush. There are now cheaper machine-made substitutes to washi such as the Thai unryu. In fact, for the beginner, I would recommend unryu as it is cheaper and is easy to work with.

The paste should be one that will integrate with the fibres of the paper such as methyl cellulose (wallpaper paste), wheat starch paste (sho fu), or rice starch paste. Yoshizawa uses sho fu, but I recommend methyl cellulose as it is easier to use. You can buy pure methyl cellulose at some art supply stores, at paper-making supply stores, and at book-binding supply stores. Otherwise, standard wallpaper paste is mainly methyl cellulose with some preservatives included (e.g. Methylan Cellulose).

Cut the two pieces of paper to approximately the size you wish, allowing a little extra paper along each edge so that you can trim it to exact size after the paper dries.
Lay out the first sheet of paper on the flat surface. This first sheet will take on the texture of the surface that you are working on. I prefer to work on glass, but I usually use plexiglass (easier to handle). Metal also works well. Polished wood will give a slight wood-grain texture.
Brush an even coat of paste onto it. The paste should be the consistency raw egg white. Make sure you have no bubbles in the paper. The paste will soak into the paper, and the paper will adhere to the flat surface.
Carefully lay the second sheet over top of the first sheet. Starting at one end, smooth the second sheet onto the first sheet with the brush. Work carefully to avoid tearing the paper and to avoid wrinkles. If you are fortunate enough to have someone to help you, they can hold onto the opposite end of the second sheet from where you are working, keeping the sheet taut and slightly above the first sheet, while you brush it down onto the first sheet.
Let the sheet dry. You can speed up the drying process by using an electric fan to blow on it. Avoid using heat, as the paper will dry at different rates, causing a buckling of the paper, resulting in a warped product. (Thanks to Courtney Spooner and Mette Pederson for this insight.) If warping is not a concern for you, try peeling the paper off before it has dried, and hang it up to dry. This will allow the paper to dry without taking on the texture of your working surface.
After the sheet dries, cut it to the exact size you want.

我看了一下，应该和裱糊的程序是一样的，因为我也曾经学过一些简单的裱糊工序。
他推荐的好像也是糨糊而不是胶水。上面我说的有误，特更正。还有他说的几种纸是
很薄的一种绵纸，里面或有些树叶的纤维。不由想到宣纸，宣纸种类也不少，我记得有一种皮纸，很坚韧，只是没有染色。应该可以试试。

本文处自:折纸居  原帖:http://www.94ceo.com/bbs/forum.php?mod=viewthread&tid=243&;extra=page%3D3
如若转载  请标明出处

小酸菜

这个是日本哪里 我就在日本 近的话有时间一定要去看

s-virus

真的是紙折的盆栽，不簡單，THANKS!

isynx

回复 2# 小酸菜


    这个日本城好像是在美国的样子

杰克俊

哟西，安逸哈